| LIQUID FILTER BAG HOUSINGS |
|---|
| Pentair Liquid Bag Housings effectively remove dirt, pipe scale and other substances from process liquids. Our dependable, long-lasting steel housings are available in a variety of sizes and O-ring materials to accommodate your chemical compatibility, flow rate and pressure requirements. |
Single Liquid Bag Housings
- Flow rates up to 220 gpm (822 Lpm)
- Up to 500 psi (34.5 bar) pressure ratings
- Low pressure drop
- Quick-swing closure with eye nuts
- Carbon Steel, 304 and 316 Stainless Steel construction
- ASME Code U or UM
|
Multi-Round Liquid Bag Housings
- Flow rates up to 3,500 gpm (13,249 Lpm)
- 2 to 24 basket housing design
- 1 50 psi to 3000 psi (10.3 to 206.8 bar) pressure ratings
- Low pressure drop
- Swing bolts with bearing-assisted davit closure
- Positive hold down welded to underside of closure lid
- Carbon Steel, 304 and 316 Stainless Steel construction
- ASME Code U
|
| SPECIALTY HOUSINGS |
|---|
| Pentair offers a variety of filter housings to meet the specific needs for chemical compatibility, temperature and heavy sediment applications. |
Specialty Housings
- Polypropylene
- High temperature
- all natural polypropylene
- carbon and stainless steel
|
In-Line Strainer Housings
- Flow rates from 1 to 1,000 gpm (3.8-3,7851 Lpm)
- High dirt load capacity
- Carbon Steel, 304 and 316 Stainless Steel construction
|
| LIQUID FILTER BAGS |
|---|
| Pentair Liquid Filter Bags offer economical filtration for a wide array of applications. Our highly controlled manufacturing procedures ensure consistent quality and contamination free products. |
Liquid Filter Bags
- Unique bag designs provide added strength and avoid risk of bypass
- Wide array of media fibers to meet needed temperature and micron specifications
- 1 to 1500 micron rating
- Multi-layered filtering capabilities for higher dirt-holding capacity for fewer change-outs
- Silicone free
- Easy to install and replace
- Fit all industry-standard liquid bag housings
|
Maximum High Performance Filter Bags
- 96 to 99% efficiency at 2 to 35 microns or greater (depending on model)
- Maximum dirt loading with low initial pressure drop
- Multi-layer graded density depth filtration for maximum efficiency rating
- Silicone free
- Fits any standard metal ring #2 size housing
|
Pleated Series Filter Bags
- More than four times the surface area of standard filter bags
- Polypropylene or polyester felt media, ultrasonic welded construction
- Fully supported pleats
- Silicone free
- Positive sealing flange designs
- Silicone free
- Available medias range from 1 to 200 micron
|
Strainer Basket
- Available for liquid bag housing and in-line strainer housings
- 304 and 316 Stainless Steel construction
- Strainer, mesh lined and pleated styles
- Safe-edge interior for easy bag removal
|
| LIQUID CARTRIDGE FILTER HOUSINGS |
|---|
| Pentair® Liquid Cartridge Housings effectively remove substances from a wide variety of process liquids. Our rugged, long-lasting steel housings provide the versatility of choosing cartridges needed to accommodate your flow rates, chemical compatibility and particle retention requirements. Pentair can design a unique filtration solution that fits your needs perfectly. |
Series C44, C66 to C88 Liquid Cartridge Housings
- Flow rates from 20 to120 gpm (75.7 to 457 Lpm)
- 150 psi (10.3 bar) pressure ratings
- Carbon Steel, 304 and 316 Stainless Steel construction
- 1-6 round
- ASME Code U or UM
|
Multi-round Liquid Cartridge Housings
- Flow rates from 120 to 4,100 gpm (454 to15,520 Lpm)
- Capacity of 11 to 205 liquid cartridges
- Bearing assisted davit assemblies with optional hydraulic lid lift assembly
- ASME Code U or UM
|
Hydraulic Cartridge Housings
- Designed specifically to remove particulates from oils, fuels and industrial process fluids
- Single round flow rates to 120 gpm (454 Lpm)
- Multi-round flow rates from 360 to 4,500 gpm (1,363 to 17,3041Lpm)
- 150 psi (10.3 bar) pressure ratings
- Carbon Steel, 304 and 316 Stainless Steel construction
- Multi-round housings feature bearing assisted davit assembly
- ASME Code U or U
|
|
| LIQUID FILTER CARTRIDGES |
|---|
| Pentair® Filter Cartridges provide superior loading and adsorption, as well as broad chemical compatibility. And we’ll gladly develop customized solutions for unique filtration challenges. |
Versaflex® Gradient Density Filter Cartridges
- 100% polypropylene construction for superior chemical purity and chemical compatibility
- Up to three times the dirt holding capacity of similar sized sediment cartridges
- Gradient density from outer to inner surface
- Meltblown, spun bonded and high efficiency models
- 9.75" to 40" lengths (248mm to 1,016mm)
|
Pentaflex™ Absolute Pes Membrane Filter Cartridges
Polypropylene and polysulfone design meets the specialized needs of the food and beverage, electronics, pharmaceutical, and high purity chemical industries
- 0.1 to 0.8 absolute micron ratings
- Highly asymmetric membrane for full particle retention
- High flow rates with extended cartridge life
- 10" to 40" lengths (254mm to 1,016mm)
|
Teflex™ Absolute PTFE Membrane Filter Cartridges
- Polypropylene/polytetrafluoroethylene construction suitable for general purpose and high purity applications
- 0.1 to 0.8 absolute micron ratings
- PTFE membrane for full particle retention
- 10" to 40" lengths (254mm to 1,016mm)
|
Pleated Cellulose Filter Cartridges - Cellflex™, Coreflex™, Proflex™
- Unique combinations of materials provide efficient filtration at an economical price
- Pleated designs maximize dirt-holding capacity
- 4.8" to 40" lengths (122mm to 1,016mm)
|
Stringflex™ Wound Depth Filter Cartridges
- Wide variety of filter media and core materials to provide broad chemical compatibility
- Suitable for low to high temperature applications (up to 750°F (399°C))
- FDA-listed materials available
- 9.75" to 40" in length (248mm to 1,016mm)
|
|
